Minimoog Moogerfooger Ring Modulator

• Ask a question
• Tell a friend about this product
• Shipping Costs Explained
• Outside the UK? - Read this
• Seen a Better Price?

Minimoog Moogerfooger Ring Modulator

The Moog MF-102 Moogerfooger Ring Modulator could be the best ring mod ever. Lots of fun to play with; turns the guitar into something else. This all-analog ring modulator rebuilds your sound into 2 separate tones and then uses an internal carrier oscillator to spread those tones apart in the frequency spectrum.

The higher the carrier frequency, the more the new tones are separated. The very useable effects can be anything: slow, velvet-smooth tremolo, jangling chains, Chinese gongs. or classic outer space sounds. The LFO imparts trills, vibratos, and siren effects.

Features

• Frequency rotary control, which varies the carrier frequency frequency over a 6-octave range
• Rate rotary control, which varies the LFO's frequency from 0.1 Hz to 25 Hz.
• LFO Amount rotary control, which adjusts the amount that the LFO output sweeps the carrier oscillator
• Mix rotary control, which crossfades continuously from unmodulated to modulated audio
• Drive rotary control, which adjusts the gain of the audio input
• Square-Sine rocker switch, which chooses the LFO waveform
• Lo-Hi rocker switch, which chooses between the low frequency carrier range (2 Hz to 130 Hz) and the high frequency carrier range (60 Hz to 4,000 Hz)
• Level, a 3-color LED that is used to set the Drive control
• LFO, a LED that indicates the LFO rate
• Bypass, a 2-color indicator LED that tells whether the filter is on or bypassed
• On/Bypass, a rugged, smooth-acting 'stomp switch'

Jack Panel Features

• Audio In 1/4 in. phone jack: accepts any instrument-level or line-level audio signal from -16 dBm to +4 dbm
• Audio Out 1/4 in. phone jack: -4 dBm nominal output level
• Frequency, Rate, LFO Amount, Mix, all of which are stereo 1/4 in. jacks that accept moogerfooger EP1 (or equivalent) expression pedals, or control voltages from 2-circuit or 3-circuit 1/4 in. jacks.
• Aux Audio In: provides a means of applying an external signal to the ring mdulator, in place of the carrier oscillator
• LFO Out jack: delivers the LFO voltage for use by other voltage-controlled devices.
• Carrier Out jack: delivers the carrier signal for use by other devices
• +9V Power Input jack: accepts standard 9 volt power adapters (power adapter included)

Technical

• Case: Black panel with hardwood sides - classic analog appearance.
• Dimensions: 9 x 6 x 2-1/2 in.
• Net Weight: 2 lbs.
• Shipping Weight: 4 lbs., including power adapter and instruction manual
• Power Requirements: 105-125 volt, 5W